In device manager, if you found the PCI devices changes to PCI Simple Communications Controller and with a yellow exclamation mark, it means that your PCI Simple Communications Controller driver is missing and your PCI device cannot be recognized by Windows 10.

1. Pci Simple Communications Controller Driver Windows Xp
2. Pci Simple Communications Controller Windows Xp Driver
3. Pci Simple Communications Controller Driver Xp
4. Pci Simple Communications Controller Windows Xp

Contents:

What is PCI Simple Communications Controller?

Tech support scams are an industry-wide issue where scammers trick you into paying for unnecessary technical support services. You can help protect yourself from scammers by verifying that the contact is a Microsoft Agent or Microsoft Employee and that the phone number is an official Microsoft global customer service number. I don’t know if this will help anyone else, I hope it does. Reconnect the device and power it on. PCI Simple Communications Controller Drivers Download for Windows 10, 8, 7, XP, Vista.

PCI is short for Peripheral Component Interconnect, it is used to connect the devices to computer. A PCI device is plugged into the PCI slot on the motherboard. The network card is a typical PCI slot device.

PCI Simple Communications Controllers missing is lack of the Intel Management Engine interface drivers. Normally it happens after you upgrade the system from Windows 7, 8 to Windows 10, all the devices and drivers are installed correctly, but maybe this one cannot installed.

So try to download and update Intel management engine driver for Windows 10, 8, 7 to fix PCI simple communications controllers device driver missing problem.

There are 3 ways you can download and update the IME (Intel Management Engine) driver.

Solution 1: Update PCI Simple Communications Controllers Driver by Device Manager

Using device manager to update the IME driver will be an easy way, you can try it at first. If you have already tried it, you can goes to solution 2 and solution 3 directly.

1. Open Device Manager.

2. Expand Other Devices and find the PCI Simple Communications Controller.

3. Right-click it and choose Update Driver.

4. Choose the first option: Search automatically for updated driver software.

After that, Windows will search PCI devices drivers online and update it automatically.

If this driver can find by Windows, you have already fixed it. If Windows remind that, you have already installed the latest version PCI Simple Communications Controller but the problem still exist, follow the below solutions.

Solution 2: Update PCI Simple Communications Controller Automatically

Updating PCI Simple Communications Controller driver in automatically way will be the best choice. It will save you more time in the whole process of finding the missing driver, downloading and installing the driver. More additional, if you have less knowledge about the PCI devices and IME, all the process will takes more time.

You can use Driver Booster to help you. Driver Booster can scan all computer hardware devices such as chipset, motherboard and its slots, find the missing and outdated drivers. Then provide the right and latest version of drivers for the computer. Using this way, you can download and update PCI Simple Communications Controller drivers for Windows 10, 8.1, 7 easily and fast.

1. Download, install and run Driver Booster on your computer.

2. Scan. The first step will help you detect the disappearing PCI Simple Communications Controller driver.

3. Find the Intel Management Engine and click Update.

And if you are not sure what driver you should to update, you can update all the drivers in one time.

Solution 3: Download and Update Intel Management Engine Drivers Manually

The Intel Management Engine driver will cause this error. So updating the Intel Management Engine driver can fixes the driver error perfect. But the manually way will be some complex, so be some patience. Of course, you can go to solution 2 to use the automatic way.

1. Goes to this page: Intel Management Engine Drivers.

In the official download page, you will find an additional note:

It means this error is caused by the incorrect Intel ME driver.

2. Here you can download the ME_Corporate_Win7_8.1_10_11.0.0.1194.zip file. This file supports all the 32 bit & 64 bit Windows 10, 8.1, 7.

3. Unzip the ME_Corporate_Win7_8.1_10_11.0.0.1194.zip. And there are 3 folders you can find: ME_SW_MSI, MEI-Only Installer MSI, and WINDOWSDriverPackages.

4. Open the first folder ME_SW_MSI and click SetupME.exe to start install the Intel Management Engine driver.

Follow the installation to install it.

5. After the Intel ME driver installed, you should restart your computer because the chipset-based driver need to reboot to take effect.

And then you can goes to device manager, the PCI Simple Communication Controller disappears, it means the right PCI Simple Communications Controller drivers is installed. So it worked.

Note for Windows 7:

If it is the Windows 7 PCI Simple Communications Controllers driver missing, you need to install a Kernel-Mode Driver Framework 1.11 (KB 2685811) at first, and you can download it from this page.

Easier Way for Windows 7:

If you are using Windows 7, and don’t want to install the framework, you can also download this file: MEI_ALLOS_6.1.0.142_PV.exe. After that, you can double-click to install it directly.

The MEI_ALLOS_6.1.0.142_PV.exe is an Intel Management Engine driver for 5 series chipset-based desktop boards. And it can fully supports Windows 7, Vista and XP 32 bit and 64 bit.

Follow these steps, the Intel Management Engine will installed successfully. And it will fix PCI Simple Communications Controller not recognized error.

Related Articles:

3rd July 2018

Virtio drivers are paravirtualized device drivers for KVM virtual machines.

Paravirtualized drivers enhance the performance of machines, decreasing I/O latency and increasing throughput to near bare-metal levels.

It is recommended to use the paravirtualized drivers for fully virtualized machines.

Most Linux distributions include the virtio drivers as standard. This guide explains how to install them in Windows.

This guide was written for Zetastack users but applies to any Windows guest VM running on a KVM host.

This includes Nutanix, Red Hat Virtualization (RHEV), Proxmox VE, oVirt and OpenStack.

If your device manager looks like this, then this guide will help you.

Download ISO

We recommend the stable release, the same as what is shipped with Red Hat Enterprise Linux.

This is the link to download:

Download and add the ISO to your virtualization platform.

In Zetastack this is done in Settings Import.

Machine Configuration

Edit the machine configuration and set these:

• Disk bus: Virtio SCSI pass-through controller
• NIC model: Virtio Ethernet
• Video model: QXL
• Video RAM: 32MB

Attach ISO

This bit depends on whether you are installing a new Windows VM or you already have an existing Windows VM.

If you are installing a new Windows VM, set the ISO to be the 2nd CD-ROM drive leaving the Windows install ISO as the 1st CD-ROM drive.

Begin Install

If you are not installing a new Windows VM, you can skip this section.

Pci Simple Communications Controller Driver Windows Xp

Storage Driver

At the disk detection stage, the Windows installer cannot detect any disks for installation.

This is expected behaviour, since the virtio drivers have not been loaded yet and are not included by Microsoft in the installation media.

Click 'Load driver' and select 'CD Drive (E:) virtio-win-0.1.1'

The driver required is the 'VirtIO SCSI pass-through controller' located at:

For other editions of Windows, the driver will be located in the relevant directory on the ISO.

Select the driver and click 'Next'.

The driver is loaded and the and the disk is now detected.

Select the disk for installation and click 'Next'.

Post Install

Once the installation is complete and the VM has booted, the next steps are to install the guest agent and resolve any missing drivers.

Guest Agent

It is essential the guest agent is installed.

The guest agent is used by the hypervisor to communicate directly with the VM.

The guest agent is required for clean VM shutdown and to enable live snapshots of the VM images.

On the task bar click 'File Explorer'.

Select 'This PC' then double click 'CD Drive (E:) virtio-win-0.1.1'.

Open the 'guest-agent' folder.

Right click the 'qemu-ga-x64' file and select 'Install'.

The QEMU guest agent will now install.

Once installed the VM must be completely shutdown before the agent can run.

When the VM is started again, the guest agent service will automatically start.

Device Manager

In Device Manager we can see the following unconfigured devices.

This table lists the devices and the drivers required.

Pci Simple Communications Controller Windows Xp Driver

The procedure is simple but repetitive.

Generic Bus

This is a Microsoft bug which is easily resolved.

Right click on 'HID Button over Interrupt Driver' and select 'Update Driver Software...'

Select 'Browse my computer for driver software'.

Select 'Let me pick from a list of device drivers on my computer'.

Select the model 'Generic Bus'.

This resolves the bug, and removes the driver warning.

Virtio Ethernet Adapter

This is a high speed driver capable of 10GbE and better.

Right click on 'Ethernet Controller' and select 'Update Driver Software...'.

Select 'Browse my computer for driver software'.

Select 'CD Drive (E:) virtio-win-0.1.1' and click OK.

Device Manager will automatically find the correct driver. The path to the driver does not need to be specified.

At the prompt click 'Install'.

Pci Simple Communications Controller Driver Xp

The driver is installed.

The device description has now changed in Device Manager.

Virtio Balloon Driver

The balloon driver allows the memory in the VM to be changed dynamically.

Right click on 'PCI Device' and select 'Update Driver Software...'.

Pci Simple Communications Controller Windows Xp

Follow the same steps for the Ethernet adapter above to complete the driver installation.

Virtio Input Driver

This provides accurate mouse tracking within the console.

Right click on 'PCI Input Device' and select 'Update Driver Software...'.

Follow the same steps for the Ethernet adapter above to complete the driver installation.

Virtio Serial Driver

This is a virtual serial port for communication between the hypervisor and the VM.

Right click on 'PCI Simple Communications Controller' and select 'Update Driver Software...'.

Follow the same steps for the Ethernet adapter above to complete the driver installation.

QXL Video Driver

This is a video driver that improves performance and allows for higher resolutions.

It also provides a seamless cursor when using the console to manage the VM.

Right click on 'Microsoft Basic Display Adapter' and select 'Update Driver Software...'.

Follow the same steps for the Ethernet adapter above to complete the driver installation.

Cursor Tweak

When using the QXL driver, the mouse cursor needs to be tweaked.

This will provide a seamless cursor in web based VM consoles.

On the start menu click 'Settings'.

Click 'Devices'.

Click 'Mouse & touchpad'.

Click 'Additional mouse options'.

In the Pointers tab, enable 'Enable pointer shadow' and click OK to update.

This allows the use of black and extra large cursors.

This concludes the guide.